We followed correctly all steps of installation and example described on gipets_release_1.5_user_manual.pdf document, available on website, but when the test was executed an error happened.

The IPV4 connection from both machines was right. We used Cross cable to connect the machines.

The used license was sent for us by email, and was placed in the place indicated in gipets_release_1.5_user_manual.pdf.

I am not have problems to open the campaing, When i execute the test - TC_COR-1082-1, the proceding show the errors, but the parameters and configuration are equals to manual. Several steps are done, and final show me a error message.

Error:
[11:52:41.296]MTC.....................................................[Created]
[11:52:41.343]SYSTEM..................................................[Created]
[11:52:41.375]TC_COR_1082_01..........................................[Started]
[11:52:41.421]ipPort.........................[Mapped to ethernetPort of SYSTEM]
[11:52:41.421]cfPort.............................[Mapped to cfTaPort of SYSTEM]
[11:52:41.421]syncPort..............................[Connected to syncSendPort]
[11:52:41.921]MTC.............................................[Set Verdict]pass
[11:52:41.968]cfPort.............[Send a UniCast Message to cfTaPort of SYSTEM]
[11:52:41.984]MTC..................................................[Terminated]
[11:52:41.984].......................................[Terminated][Verdict]error


Debtor.
Vanessa D'Alessio

Log: TC_COR_1082_01.off

[TE][11:52:41.296][The create component operation]
[][-1]
[Running Component][UNKNOWN]
[The created component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[name]MTC
[Kind]1
[TE][11:52:41.343][The create component operation]
[][-1]
[Running Component][UNKNOWN]
[The created component][Type]AtsIpv6_TestSystem.NodeTestAdapter[ID]SYSTEM[Name]SYSTEM
[name]SYSTEM
[Kind]3
[TM][11:52:41.375][The start of a test case]
[UNKNOWN][0]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The id of the test case][Name]TC_COR_1082_01
[The list of parameters required by the testcase]
EMPTY
[Duration of the execution]Infinity
[SA][11:52:41.421][The port map operation]
[E:\Work\src\Ipv6_ETSI_STF276\IPv6_ETSI_STF276\ttcn3\EtsiAts\AtsIpv6\AtsCommon\AtsIpv6_TestConfiguration.ttcn][40]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The first port of mapping][Index]-1[Type]AtsIpv6_TestSystem.Ipv6Port[Name]ipPort
[Owner][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The second port of mapping][Index]-1[Type]AtsIpv6_TestSystem.Ipv6Port[Name]ethernetPort
[Owner][Type]AtsIpv6_TestSystem.NodeTestAdapter[ID]SYSTEM[Name]SYSTEM
[SA][11:52:41.421][The port map operation]
[E:\Work\src\Ipv6_ETSI_STF276\IPv6_ETSI_STF276\ttcn3\EtsiAts\AtsIpv6\AtsCommon\AtsIpv6_TestConfiguration.ttcn][41]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The first port of mapping][Index]-1[Type]AtsIpv6_TestSystem.CfPort[Name]cfPort
[Owner][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The second port of mapping][Index]-1[Type]AtsIpv6_TestSystem.CfPort[Name]cfTaPort
[Owner][Type]AtsIpv6_TestSystem.NodeTestAdapter[ID]SYSTEM[Name]SYSTEM
[CH][11:52:41.421][The port connect operation]
[E:\Work\src\Ipv6_ETSI_STF276\IPv6_ETSI_STF276\ttcn3\EtsiAts\AtsIpv6\AtsCommon\AtsIpv6_TestConfiguration.ttcn][42]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The first port of connection][Index]-1[Type]AtsIpv6_TestSystem.SyncPort[Name]syncPort
[Owner][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The second port of connection][Index]-1[Type]AtsIpv6_TestSystem.SyncPort[Name]syncSendPort
[Owner][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[TE][11:52:41.921][The setverdict operation]
[E:\Work\src\Ipv6_ETSI_STF276\IPv6_ETSI_STF276\ttcn3\EtsiLibrary\LibCommon\LibCommon_VerdictControl.ttcn][49]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The value to be set to the local verdict]pass[Type]verdicttype
[TE][11:52:41.953][The activation of a default]
[E:\Work\src\Ipv6_ETSI_STF276\IPv6_ETSI_STF276\ttcn3\EtsiAts\AtsIpv6\AtsCore\AtsIpv6_ProcessIpv6Packets_Testcases.ttcn][212]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The name of the default][Name]a_tn_nut[Defining Module]AtsIpv6_Defaults
[The parameters of the default]
[Parameter 0][Name][Value]{ role := "Router01", netDeviceId := "\Device\NPF_{C9D842CE-7081-4AD6-8B36-6259F0364690}", macFilterList := {'001125D73914'O, '001125D73914'O, '3333FFD73914'O, '3333FFD73914'O, '333300000001'O, '333300000002'O, '3333FF81C9B5'O, '3333FF00B8B8'O}, paramsHs01 := { useInTa := true, lla := 'FE80000000000000021125FFFED73914'O, gla := '200106605503276A021125FFFED73914'O, solNodeMca := 'FF0200000000000000000001FFD73914'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '001125D73914'O, macSolNodeMca := '3333FFD73914'O, prefixLength := 64 }, paramsHs02 := { useInTa := true, lla := 'FE80000000000000020000FFFE00B6B6'O, gla := '200106605503276B020000FFFE00B6B6'O, solNodeMca := 'FF0200000000000000000001FF00B6B6'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '001125D73914'O, macSolNodeMca := '3333FFD73914'O, prefixLength := 64 }, paramsHs03 := { useInTa := false, lla := 'FE80000000000000020000FFFE00C7C7'O, gla := '200106605503276C020000FFFE00C7C7'O, solNodeMca := 'FF0200000000000000000001FF00C7C7'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '00000000A3A3'O, macSolNodeMca := '3333FF00A3A3'O, prefixLength := 64 }, paramsRt01 := { useInTa := true, lla := 'FE80000000000000021125FFFED73914'O, gla := '200106605503276A021125FFFED73914'O, solNodeMca := 'FF0200000000000000000001FFD73914'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '001125D73914'O, macSolNodeMca := '3333FFD73914'O, prefixLength := 64 }, paramsRt02 := -, paramsRt03 := { useInTa := false, lla := 'FE80000000000000020000FFFE00A3A3'O, gla := '200106605503276A020000FFFE00A3A3'O, solNodeMca := 'FF0200000000000000000001FF00A3A3'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '00000000A3A3'O, macSolNodeMca := '3333FF00A3A3'O, prefixLength := 64 }, paramsRt04 := -, paramsCn03 := -, paramsMn01 := { useInTa := true, lla := 'FE80000000000000020000FFFE00B8B8'O, gla := '200106605503276A020000FFFE00B8B8'O, solNodeMca := 'FF0200000000000000000001FF00B8B8'O, haAca := '200106605503276A0000000000000000'O, mnHoa := '200106605503276A020000FFFE00B8B8'O, mnCoa := '200106605503276B020000FFFE00B8B8'O, macUca := '001125D73914'O, macSolNodeMca := '3333FF00B8B8'O, prefixLength := 64 }, paramsIut := { useInTa := true, lla := 'FE80000000000000020802FFFE81C9B5'O, gla := '200106605503276A020802FFFE81C9B5'O, solNodeMca := 'FF0200000000000000000001FF81C9B5'O, haAca := '200106605503276AFDFFFFFFFFFFFFFE'O, mnHoa := '200106605503276A020802FFFE81C9B5'O, mnCoa := '200106605503276B020802FFFE81C9B5'O, macUca := '00080281C9B5'O, macSolNodeMca := '3333FF81C9B5'O, prefixLength := 64 } }[Type]CfMessage[Defining Module][Name]AtsIpv6_TestConfiguration_TypesAndValues[Defining Module]AtsIpv6_TestConfiguration_TypesAndValues[Value Encoding]ExtFuncCodec[PassingMode]1
[Parameter 1][Name][Value]{ useInTa := true, lla := 'FE80000000000000021125FFFED73914'O, gla := '200106605503276A021125FFFED73914'O, solNodeMca := 'FF0200000000000000000001FFD73914'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '001125D73914'O, macSolNodeMca := '3333FFD73914'O, prefixLength := 64 }[Type]Ipv6NodeParams[Defining Module][Name]AtsIpv6_TestConfiguration_TypesAndValues[Defining Module]AtsIpv6_TestConfiguration_TypesAndValues[Value Encoding]ExtFuncCodec[PassingMode]1
[Parameter 2][Name][Value]{ useInTa := true, lla := 'FE80000000000000020802FFFE81C9B5'O, gla := '200106605503276A020802FFFE81C9B5'O, solNodeMca := 'FF0200000000000000000001FF81C9B5'O, haAca := '200106605503276AFDFFFFFFFFFFFFFE'O, mnHoa := '200106605503276A020802FFFE81C9B5'O, mnCoa := '200106605503276B020802FFFE81C9B5'O, macUca := '00080281C9B5'O, macSolNodeMca := '3333FF81C9B5'O, prefixLength := 64 }[Type]Ipv6NodeParams[Defining Module][Name]AtsIpv6_TestConfiguration_TypesAndValues[Defining Module]AtsIpv6_TestConfiguration_TypesAndValues[Value Encoding]ExtFuncCodec[PassingMode]1
[The resulting default reference]de.tu_berlin.cs.uebb.muttcn.runtime.Default@43b5bb[Type]default
[SA][11:52:41.968][A unicast send operation]
[E:\Work\src\Ipv6_ETSI_STF276\IPv6_ETSI_STF276\ttcn3\EtsiAts\AtsIpv6\AtsCommon\AtsIpv6_Preambles.ttcn][61]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The port via which the message is send][Index]-1[Type]AtsIpv6_TestSystem.CfPort[Name]cfPort
[Owner][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The receiver port][Index]-1[Type]AtsIpv6_TestSystem.CfPort[Name]cfTaPort
[Owner][Type]AtsIpv6_TestSystem.NodeTestAdapter[ID]SYSTEM[Name]SYSTEM
[The message]{ role := "Router01", netDeviceId := "\Device\NPF_{C9D842CE-7081-4AD6-8B36-6259F0364690}", macFilterList := {'001125D73914'O, '001125D73914'O, '3333FFD73914'O, '3333FFD73914'O, '333300000001'O, '333300000002'O, '3333FF81C9B5'O, '3333FF00B8B8'O}, paramsHs01 := { useInTa := true, lla := 'FE80000000000000021125FFFED73914'O, gla := '200106605503276A021125FFFED73914'O, solNodeMca := 'FF0200000000000000000001FFD73914'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '001125D73914'O, macSolNodeMca := '3333FFD73914'O, prefixLength := 64 }, paramsHs02 := { useInTa := true, lla := 'FE80000000000000020000FFFE00B6B6'O, gla := '200106605503276B020000FFFE00B6B6'O, solNodeMca := 'FF0200000000000000000001FF00B6B6'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '001125D73914'O, macSolNodeMca := '3333FFD73914'O, prefixLength := 64 }, paramsHs03 := { useInTa := false, lla := 'FE80000000000000020000FFFE00C7C7'O, gla := '200106605503276C020000FFFE00C7C7'O, solNodeMca := 'FF0200000000000000000001FF00C7C7'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '00000000A3A3'O, macSolNodeMca := '3333FF00A3A3'O, prefixLength := 64 }, paramsRt01 := { useInTa := true, lla := 'FE80000000000000021125FFFED73914'O, gla := '200106605503276A021125FFFED73914'O, solNodeMca := 'FF0200000000000000000001FFD73914'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '001125D73914'O, macSolNodeMca := '3333FFD73914'O, prefixLength := 64 }, paramsRt02 := -, paramsRt03 := { useInTa := false, lla := 'FE80000000000000020000FFFE00A3A3'O, gla := '200106605503276A020000FFFE00A3A3'O, solNodeMca := 'FF0200000000000000000001FF00A3A3'O, haAca := -, mnHoa := -, mnCoa := -, macUca := '00000000A3A3'O, macSolNodeMca := '3333FF00A3A3'O, prefixLength := 64 }, paramsRt04 := -, paramsCn03 := -, paramsMn01 := { useInTa := true, lla := 'FE80000000000000020000FFFE00B8B8'O, gla := '200106605503276A020000FFFE00B8B8'O, solNodeMca := 'FF0200000000000000000001FF00B8B8'O, haAca := '200106605503276A0000000000000000'O, mnHoa := '200106605503276A020000FFFE00B8B8'O, mnCoa := '200106605503276B020000FFFE00B8B8'O, macUca := '001125D73914'O, macSolNodeMca := '3333FF00B8B8'O, prefixLength := 64 }, paramsIut := { useInTa := true, lla := 'FE80000000000000020802FFFE81C9B5'O, gla := '200106605503276A020802FFFE81C9B5'O, solNodeMca := 'FF0200000000000000000001FF81C9B5'O, haAca := '200106605503276AFDFFFFFFFFFFFFFE'O, mnHoa := '200106605503276A020802FFFE81C9B5'O, mnCoa := '200106605503276B020802FFFE81C9B5'O, macUca := '00080281C9B5'O, macSolNodeMca := '3333FF81C9B5'O, prefixLength := 64 } }[Type]CfMessage[Defining Module][Name]AtsIpv6_TestConfiguration_TypesAndValues[Defining Module]AtsIpv6_TestConfiguration_TypesAndValues[Value Encoding]ExtFuncCodec
[The receiver address]
[The encoding status ]
[The encoded message]5052
[The transmission status ]
[TE][11:52:41.984][The termination of a component]
[][-1]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The component is terminated][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The verdict of the terminated componet]pass[Type]verdicttype
[TM][11:52:41.984][The termination of a testcase]
[UNKNOWN][0]
[Running Component][Type]AtsIpv6_TestSystem.Ipv6Node[ID]MTC[Name]MTC
[The id of the test case][Name]
[The list of parameters required by the testcase]
EMPTY
[Verdict of the test case]error[Type]verdicttype

There are two libraries that are required for the test tool to work properly. They are JpCap and Libnet. They appear commented in previous versions of the user manual, but they did not appear in the installation process. This issue appears resolved in the last version of the user manual. Among the different solutions proposed, the easiest one consists in copying jpcap.dll and libnet.dll from <path_of_GIPETS>\lib\jpcap\os\win32 to your Windows/System32 folder (usually C:\WINDOWS\SYSTEM32).

We expect this issue will resolve your problem.